(+612) 2531 5600
info@medzin.com
PO Box 1622 Colins Street West Victoria 8077 Australia
Showing 1–20 of 564 results
Wide Mouth Square Bottle
Material : Polypropylene, Autoclavable
Categories: Bottles, Laboratory Glassware, plastic bottle, Plasticware
Weighing Scoops
Has open tubular arm
Suitable for use when small quantity of dyes or powders are to be weighed
Categories: Lab Essentials, Weighing Scoops
Water Softener (New)
Prominent feature :
Softens the hard water and provides good quality water for use in laboratories.
Remove all the calcium and magnesium ions in hard water and the soft water thus obtained liquid has hardness less than 5 ppm as CaCO3.
Specially designed for easy serviceability and recharging the resin with sodium chloride solution.
Softened water can be used as feed water to the Distillation Units.
Use of hard water in boilers, would leave the boiler with a lot of scaling and sedimentation, hence to improve the quality of the distillate and for longer life of the glass/quartz boilers, it is recommended to use softened water.
Categories: Water Distillation, Water Softner
Watch Glass, Neutral Glass
Categories: Lab Essentials, neutral watch glass
Wash Bottles (New Type)
Made from Low Density Polyethylene and are therefore translucent & unbreakable
The distinguishing feature that these bottles contain is the built in delivery tubemaking it a one piece Wash Bottle
These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed
Categories: Bottles, Laboratory Glassware, plastic bottle, Plasticware
Wash Bottles
• Made from Low Density Polyethylene which gives these bottles a translucent & unbreakable character
• Solutions can be poured easily by squeezing the bottle lightly
• The cap is fit ted with a flexible polyethylene delivery tube which can be aimed wherever required
Categories: Bottles, Laboratory Glassware, plastic bottle, Plasticware
VORTEX SHAKER
Features:
Outer shell and touch concave are made of plastic & silicone which has resistance to chemical attacks.
The thick base makes it very steady and reliable.
The maximum diameter of the mixed tube is up to 30mm. Suitable for mixing tubes / centrifugal tubes with prominent mixing effect.
12V low voltage power adapter driven, very smart and portable. Various speed adjustment with indicator.
Technical Specification:
Body Material : Main Frame: ABS, Caps: Silicone Rubber, Base: Steel Alloy
Speed Range : 0~4000 RPM
Max. Capacity : 50ml tube ( 30 mm)
Dimension (WxDxH) : 114 x 114 x 93mm
Shaking Orbit : 4.5mm
Power Input/Output : 1.2W/0.8W
Voltage : DC 12V 1A
Power : 12W
Net Weight : 850 gms
Category: Shakers
Volumetric Pipettes, 2 mark, Class AS, Batch certificate, DIN/ISO
Volumetric Pipettes, 2 mark, Class AS
Compliance with DIN ISO 648 Standard
Printed in Amber Colour
With Batch Certificate
Categories: Laboratory Glassware, Pipettes
Volumetric Pipettes, 1 mark, Class AS, Individual work Certificate, ISO
Glassco volumetric pipettes are manufactured in compliance with DIN ISO 648 standards. These pipettes are calibrated to deliver (TD, EX) + 20° C . All volumetric pipettes are calibrated by automatic machine and then the final quality check is done on the quality control centre. The volumetric pipettes come in AS Class with conformity batch certificate and Class A in individual work certificate which is printed in amber colour which fuses into the glass . Each pipette is accompanied with a batch or individual certificate in the pack you can also download the certificate from our website : www.glasscolabs.in and by scanning the QR Code from the label of the box.
Below is the overview of the one mark pipette explaining in detail the content printed on it.
Volumetric Pipettes, 1 mark, Class AS
With Individual Certificate
Compliance with ISO 648 Standard
Comes in amber colour enamel printing
Categories: Laboratory Glassware, Pipettes
Volumetric Pipettes, 1 mark, Class AS, Batch Certificate, DIN ISO
Volumetric Pipettes, 1 mark, Class AS
With Batch Certificate
Compliance with DIN ISO 648 Standard
Comes in amber colour enamel printing
Categories: Laboratory Glassware, Pipettes
Volumetric Pipettes 1 mark, Class AS, Individual work Certificate, USP
Volumetric Pipettes 1 mark, Class AS
Compliance with USP standard
With Individual Certificate
Categories: Laboratory Glassware, Pipettes
Volumetric Pipettes 1 mark, Class AS, Batch Certificate, USP
Compliance with USP standard
With Batch Certificate
Categories: Laboratory Glassware, Pipettes
Volumetric Pipette 1 mark Class B, DIN/ISO
Compliance with DIN ISO 648 Standard
Comes in amber colour enamel printing
Categories: Laboratory Glassware, Pipettes
Volumetric Flasks, Clear Glass, Class-B, With PE Stopper, ISO
Compliance with ISO 1042 Standards
With PE Stopper
Categories: Laboratory Glassware, Volumetric Flask
Volumetric Flasks, Clear Glass, Class-B, With Hollow glass Stopper, ISO
Compliance with ISO 1042 Standards
With Hollow glass Stopper
Categories: Laboratory Glassware, Volumetric Flask
Volumetric Flasks, Amber Glass, Class-B, With PE Stopper, ISO
Compliance with ISO 1042 Standards
With PE Stopper
Categories: Laboratory Glassware, Volumetric Flask
Volumetric Flasks, Amber Glass, Class-B, With Hollow glass Stopper, ISO
Compliance with ISO 1042 Standards
With Hollow glass Stopper
Categories: Laboratory Glassware, Volumetric Flask
Volumetric Flask, Red Stripe, CLASS A, UNSERIALIZED, ASTM
These flasks are made as per ASTM E-288, Class-A Serialized specification
The flasks have diamond graduated line and are calibrated TC (To Contain)
Printed in white colour enamel & with Batch Certificate
* Non ASTM
Categories: Laboratory Glassware, Volumetric Flask
Volumetric Flask, Qr Coded, Red Stripe, CLASS A, SERIALIZED, ASTM
These flasks are made as per ASTM E-288, Class-A Serialized specification
The flasks have diamond graduated line and are calibrated TC (To Contain)
Printed in white colour enamel & with Individual work Certificate
* Non ASTM
Categories: Laboratory Glassware, Volumetric Flask
Volumetric Flask, Qr Coded, CLASS A, SERIALIZED, With PTFE Stopper, ASTM
These flasks are made as per ASTM E-288, Class-A Serialized specification
The flasks have diamond graduated line and are calibrated TC (To Contain)
Printed in white colour enamel & with Individual work Certificate
* Non ASTM
Categories: Laboratory Glassware, Volumetric Flask